◆ SpookStack

bic it was concluded that the typewriting en Ql through @6 was not prepared with any of the typewriters used in the preparation of Kl through K3. It was further concluded that the typewriting on qr was not prepared with any of the typewriters used in the preparation of Ql through Q@cd or K2. Because of the lack of clarity in the carbon copy available, it could not be established definitely whether the typevwriting on Q7 was or was not prepared with either of the typewriters used in the preparation of Kl and K3. Items Ql through Q5 have been prepared by the offset printing process using a typewritten original. it could not be determined if this material was reproduced on the same machine, ‘. Item Qc6 has been prepared with a Thermo-Fax copying machine.or similar copying device. The typewriting on Q7 is too indistinct to classify but this typewriting most closely corresponds with the Laboratory standards for a Remington Electric Revers tuneuriter or an IBM Blastric Courtar typevriter, saw ws Ww Pre rs 2 owe both pica typewriters having letters spaced ten to the inch. The typewriting on Kl and K3 also most closely corresponds with the Laboratory standards for a Remington Electric Revere typewriter or an IBM Electric Courier typewriter; however, the typewriter used in the preparation of Kl was not used in preparing K3. Specimens Ql through Qc6 and Kl through K3 are tenporarily Pretained. Speciaen Q7 was returned to Mr, Parsons, of your office, on September 6, 1965. Appropriate photographs have been prepared for record purposes. NOTE: See memorandum to Mr. Conrad dated 9/6/65 captioned as above. Page 3 D-487554 JB